.

The settings in the Advanced menu in project-options are sometimes not kept.

i UN-MARK for example: "set inmage as 100% width of obj <div> "

Next time it is MARKED again.

Can't tell when ore why this happens..it does not happen always
but it causes many problems...like wrong size-ing of images
and as a result some mouse-over FX also fail to work.


Radio

That is a project setting (Options->Project Options), not a program setting. When I change it and save the project, it is the same state when the project reloads. When I start a new project , it is set to its default (checked) state.

.

Larry...while working on one and the same page
without saving,
with out quitting.
without loading another page...etc

1) I unmark all 3 of them.
2) I preview page.
3) I notice some error in the previewed page
4) Go back to that menu..and see it is back to default. (upper and lower []are marked again)


It's unstable since there's nothing to say about when this ERROR occurs.

I understand the difference between
program and project settings.

A 2nd bug (discussable) in my opinion, is the fact that the default-setting is wrong also
since that setting causes small pics to get resized...as i only discovered when asked in this forum.

A 3d bug is that resizing of small pics itself
but as you said ""known bug"
For me this is an important one that needs to be solved yesterday.


Solving the 3rd bug might also resolve the 2nd
since if 3 is solved then the default setting might be the correct one (no idea)


Radio

Are you in dual or single layout mode?

If you have a project file that does this, then send it to VM tech support with an explanation. I have gone through your steps and it does not happen to my projects.

The reason the option is there is to accommodate mobile devices - not so much a bug as you need the <img> tag to act differently depending on the targeted device and if you want (or need) the setting.

.

Single - desktop


Radio

.